Home

Welcome Guest ( Log In | Register )

4 Pages V  « < 2 3 4  
Reply to this topicStart new topic
> Hardware Donations
bbacher
post Jun 21 2006, 07:25 PM
Post #61


Equipment Host


Group: Board Member
Posts: 184
Joined: 16-April 03
From: Greenwood, IN
Member No.: 27



Hey, Grouchy! Yeah, that PSU might be the ticket to getting Mojo11 back up. I suspect it's the mobo, but someone suggested it might be the PSU.

Yep, as I recall we live in the same town. I could come by and pick it up if you let me know when/where.

Edit: I wonder if I could use that mobo also?!

This post has been edited by bbacher: Jun 21 2006, 07:26 PM
Go to the top of the page
 
Give Cheers +Quote Post
Old_Grouch
post Jun 21 2006, 07:27 PM
Post #62


Casual Poster


Group: Contributor
Posts: 7
Joined: 3-March 06
Member No.: 152



Ooops, my bad. I had it in my head that you would be able to take the whole thing.

Can't keep it at my house because I was part of the decision process to remove it and I don't want to raise conflict of interests discussions.

I'll find a good org to donate it to and that will solve all my needs.

Thanks for the fast response.

biggrin.gif
Go to the top of the page
 
Give Cheers +Quote Post
Dersgniw
post Jun 22 2006, 12:01 AM
Post #63


Treasurer, Admin, Equipment Host & Past Chairman


Group: TDPH Admin
Posts: 1,321
Joined: 16-April 03
From: under the boardwalk
Member No.: 37



Understandable Grouchy... there are a lot of places that need nice computers like that. Thanks again for the offer.


--------------------
Hope is why we are here...
Go to the top of the page
 
Give Cheers +Quote Post
Old_Grouch
post Jun 23 2006, 02:47 AM
Post #64


Casual Poster


Group: Contributor
Posts: 7
Joined: 3-March 06
Member No.: 152



Bruce and I linked up.

He has more stuff now and I have an empty garage work bench without junk.

Life b good.

Crunch on!
Go to the top of the page
 
Give Cheers +Quote Post
lilhurricane
post Jun 23 2006, 02:55 AM
Post #65


Secretary, Admin & Equipment Host


Group: TDPH Admin
Posts: 1,899
Joined: 16-April 03
From: Here & Now
Member No.: 24



QUOTE (Old_Grouch @ June 22, 2006 10:47 pm)
Bruce and I linked up.

He has more stuff now and I have an empty garage work bench without junk.

Life b good.

Crunch on!

(((Sweet ol' Grouch)))

Thank you! purplebeer.gif


--------------------
The hurrieder I go...the behinder I get
Go to the top of the page
 
Give Cheers +Quote Post
Dolphin
post Jun 23 2006, 05:35 PM
Post #66


Equipment Host


Group: Board Member
Posts: 367
Joined: 25-April 03
From: Somewhere in the Ocean
Member No.: 54



Yeah, he is a sweet 'ole Grouch head, isn't he?

Thanks, Old_Grouch biggrin.gif
Go to the top of the page
 
Give Cheers +Quote Post
Dersgniw
post Jun 23 2006, 06:14 PM
Post #67


Treasurer, Admin, Equipment Host & Past Chairman


Group: TDPH Admin
Posts: 1,321
Joined: 16-April 03
From: under the boardwalk
Member No.: 37



Sweet..... smile.gif Well, thanks Grouchy.


--------------------
Hope is why we are here...
Go to the top of the page
 
Give Cheers +Quote Post
bocephus
post Jul 25 2006, 11:21 PM
Post #68


Regular User


Group: Members
Posts: 18
Joined: 8-June 06
Member No.: 157



while looking for my KVM switch.. I stumbled upon some old cards.. haven't tested them out yet but see no reason they wouldn't work (sealed in a box & in anti-static boxes)

if anyone has use for them .. let me know..

2- Matrox Millenium PCI Graphics cards (4MB mem I think)

Adaptec AHA-2920 SCSI-1 card ( 50 pin external and internal )

Adaptec AHA 2940 SCSI 1/2 card, ( 50 pin external and internal )

Adaptec AHA 2940UW SCSI-3 card, ( 68 pin internal and external , 50 pin internal) - this is a dual channel card

BusLogic BT-948 SCSI 1/2 card, ( 50 pin external and internal )

Buslogic BT-958D SCSI-3 Card ( 68 pin internal and external , 50 pin internal - dual channel also )

NCR S1365 SCSI Card ( 50 pin external and internal and 68 pin internal )


I know we were talking about trying SCSI.. well, looks like I got that covered.. once I get around to moving drive to my mom's new computer I'll have an Athlon box to experiment with - to see if there would be any benefits using SCSI.. but if anyone wants a card let me know..


--------------------
What lies behind us and what lies before us are small matters compared to what lies within us - Ralph Waldo Emerson
Go to the top of the page
 
Give Cheers +Quote Post
spm9999
post Mar 6 2008, 02:49 AM
Post #69


Casual Poster


Group: Contributor
Posts: 9
Joined: 13-December 03
From: Imperial, Missouri
Member No.: 113



QUOTE (JMartin @ May 27, 2004 05:26 pm)
If you have hardware you want to donate to the project, please list the items here.

Thanks

I have a machine that has been crunching for 4 years this month that I am going to upgrade. So I will have extra parts that I want to donate so long as they are used for TD.

ASUS motherboard with AMD Athlon 2800+ cpu, heatsink and fan.
I can also come up with a hardrive probably too.

I will ship free as long as it used for TD..

LOVE4U.gif


--------------------
Scott
Go to the top of the page
 
Give Cheers +Quote Post
Dersgniw
post Mar 6 2008, 03:01 PM
Post #70


Treasurer, Admin, Equipment Host & Past Chairman


Group: TDPH Admin
Posts: 1,321
Joined: 16-April 03
From: under the boardwalk
Member No.: 37



Thanks spm...let me see if we can use any of that right now. Very much appreciated!


--------------------
Hope is why we are here...
Go to the top of the page
 
Give Cheers +Quote Post
spm9999
post Mar 7 2008, 01:57 AM
Post #71


Casual Poster


Group: Contributor
Posts: 9
Joined: 13-December 03
From: Imperial, Missouri
Member No.: 113



QUOTE (Dersgniw @ March 06, 2008 09:01 am)
Thanks spm...let me see if we can use any of that right now.  Very much appreciated!

Upgrade is complete. Had to get a new hardrive.. long story.........

So add to the list an 80GB WD hardrive that has winders xp installed on it.

almost enough for a complete blade?? cept for the power thingy. ph34r.gif

This post has been edited by spm9999: Mar 7 2008, 01:58 AM


--------------------
Scott
Go to the top of the page
 
Give Cheers +Quote Post

4 Pages V  « < 2 3 4
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: 6th September 2010 - 09:50 PM